Lyson Honey Pump 370W 120V

The Lyson honey pump can be used for any task requiring honey to move from one place to another.

Do not run pump dry as damage to impeller will occur. Lubricate with honey or food grade lubricant before starting motor.
  • Item Code: LYHPW2021GNF
  • 2959.95 USD$2,959.95

A 370 Watt (1/2 HP) motor powers this Lyson honey pump. Most often used to pump honey from a clarifying tank to bottling tanks during extraction, but can be used for any task requiring honey to move from one place to another. Has the capacity to pump up to 240 gallons per hour with a variable speed inverter controlled motor, and can also be reversed.

This pump also has a start/stop function that works with a switch (float/level) to control the honey level in a tank or sump. Any switch that closes (provides continuity) when the pump needs to run and opens when the pump needs to stop will work. The pump comes with a connector jumper to allow the pump to run in manual speed control (forward or reverse).

Click here for a spare connector that can be used with your switch to automate the pump. You can then save the original jumper connector for manual operation or troubleshooting.

Product Specifications:

  • Power Supply: 120V AC, 4 amp consumption
  • Power Cord: NEMA 5-15P - three prong polarized plug
  • 1.5" sanitary inlet connection
  • 1.5" sanitary outlet connection
  • Run switch jumper connector included
  • Two 1.5" sanitary to barbed fittings included
  • Two 1.5" sanitary gaskets included
  • Two 1.5" tri clamp fittings included
  • Two 1.5" hose clamps included
  • Hose (1.5" or 40mm) not included
  • Four casters (two lockable) with handle included

This Lyson Standard product is covered by a 2-year structural and a 2-year/24-month limited warranty. Click to read the Betterbee Warranty on Lyson Product policy for more details.