Assembly Instructions for Hive Stand for the Polystyrene Bottom Board without Debris Tray

Printable version of Cedar Hive Stand Instructions

Materials
A) 2 side rails
B) 1 front cross piece
C) 3 cross rails
D) 2 vertical legs
Not Pictured - Bag of screws

Step 1: Using the 2” screws attach cross rails (C) to the side rails (A) flush to each end.

Step 2: Using the 1-5/8” screws attach the vertical legs (D) flush to the bottom edge of the side rails and tight to the inside of the front cross rail from Step 1.

Step 3: Now, using 2” screws, attach the 3rd cross rail tight against the vertical legs.

Step 4: Attach the landing zone (B) to front of the stand. Use 2” screws in the bottom hole and 1-5/8” in the top holes.